How To Remove Shades From Window

You've suffered with the aforementioned tacky and dingy mini blinds, wooden blinds or other blind type that has been an eyesore to you and your guests for years. It'southward a very liberating to supervene upon them with a new set of shades. Before you remove them, you're going to want to read this post to ensure y'all don't harm your wall or window frame. It'south important that during this process you take an ample amount of time to complete this task and bring the right set of tools.

Tools You Will Need:

• Pliers
• Screwdriver
• Joint Compound
• Wall Primer (Optional)
• Pigment Brush
• Putty Knife
• Sponge
• Paint Matching Your Electric current Wall's Color

Now information technology'southward time to jump into the project.  Here is our 7 footstep guide for blind removal success!

Step 1: Earlier you lot do annihilation, we encourage you lot to raise your blinds all the way up to the peak. This will help make them easier for y'all to control during the removal process.

Stride 2: Often times, some blinds treatments will apply a cornice or a valance to comprehend the tiptop runway and brackets. Y'all want to remove the valance, it's important that you are gentle when completing this. Accept the bottom of the valance and push it towards the window to create a gap between the top of the valance and the top of the clips. Carefully push the valance upwards and outwards until it's not touching the clips. If yous don't remove the valance gently, the clips may fall off.

Footstep iii: If you have a door-mounted bullheaded, you need to hold down the brackets that are to be removed. These brackets are typically attached to the bottom role of the blind confronting the wall. The end cap of the bottom rails can take hold-downwards pins. If this is so, remove the concur downwards pins prior to removing the agree downwards brackets.

From here you want use your screwdriver to remove the concur downwardly bracket screws. If the screws are likewise tight to remove with a screwdriver, this is where pliers comes in handy.

Step four: If you are removing false wood, wood or some other horizontal blind, y'all need to unlatch the mounting brackets from both the front and side caput rail out. If the blinds are bulky or heavy, y'all might need another person to help y'all during this step. If you have Roman shades, they tin be spring loaded or require a tab to loosen the shade. Y'all might demand to cheque dorsum to the product's original installation guide to figure out what bracket your blind uses.

Step 5: Remove the side and heart brackets that are used for mounting with a screwdriver. If the blinds take wall anchors, you may have to remove them with needle nosed pliers.

Step six: The screws on the blinds may have left some pocket-size holes in your wall. At present it'southward time to go the joint compound out and patch the holes up with a putty pocketknife. When the chemical compound is notwithstanding wet yous want shine it out with a sponge then let it dry out. Later on it has dried you lot want to use some paint simply to touch up the surface area.

Step 7: Now it'southward time to celebrate.  Congratulations on removing you lot onetime, tacky, and muddied blinds!

If you oasis't purchased replacement shades even so, bank check out CellularWindowShade.com's window treatment options. Our team will walk yous through our options, and so get you the right shades that fit perfectly in your domicile!

Source: https://cellularwindowshades.com/blog/removing-blinds-without-damaging/

Posted by: petersonhorms2000.blogspot.com

Share this post