How To Enter Bios Through Windows 10

Windows 10 enter BIOS choice (Image credit: Windows Central)

On Computers, the Bones Input Output System (BIOS) is an essential low-level software that sits on one of the fries of the motherboard, and it's responsible for basic operations, such as booting and configuring hardware (mouse, keyboard, memory, processor, etc.). The Unified Extensible Firmware Interface (UEFI) is a modern software designed to supplant the legacy BIOS with additional benefits, such as improved security, faster kick times, big chapters difficult bulldoze back up, and more.

Although these are dissimilar technologies, modern devices now use UEFI, but to avert confusion, sometimes yous'll keep to hear the term "BIOS" to refer to "UEFI."

If you utilize a Windows 10 device, normally, the firmware works automatically. However, sometimes you may all the same need to enter the motherboard BIOS to troubleshoot issues, enable or disable features (such equally virtualization, RAID array, and secure kick), adjust memory and processor avant-garde settings, and more.

The merely caveat is that the BIOS is a startup environs, which ways that you can't admission information technology when Windows ten is running. However, if you accept to alter some system settings, in that location are multiple methods to admission the motherboard firmware.

In this Windows x guide, nosotros'll walk you through the steps to enter the BIOS/UEFI on your computer to alter advanced organization settings.

• How to admission UEFI (BIOS) using Settings
• How to access UEFI (BIOS) using boot fundamental option

How to access UEFI (BIOS) using Settings

To enter the UEFI firmware from Windows 10, use these steps:

Warning: Irresolute the wrong firmware settings can preclude your computer from starting correctly. You should only access the motherboard firmware when you have an excellent reason. It's causeless that you know what you're doing.

1. Open Settings.
2. Click on Update & Security.
3. Click on Recovery.
4. Under the "Advanced startup" department, click the Restart now button.

Source: Windows Central (Image credit: Source: Windows Key)

5. Click on Troubleshoot.

Source: Windows Central (Image credit: Source: Windows Central)

6. Click on Advanced options.

Source: Windows Primal (Image credit: Source: Windows Primal)

7. Click the UEFI Firmware settings pick.

Source: Windows Central (Image credit: Source: Windows Central)

8. Click the Restart button.

Source: Windows Central (Epitome credit: Source: Windows Key)

In one case you complete the steps, the device will restart and boot into the UEFI firmware assuasive you lot to modify advanced settings, such as to disable or enable secure kick, change kicking gild, gear up up a hardware RAID array, enable virtualization, and other settings depending on the motherboard support.

How to access UEFI (BIOS) using boot key option

If you don't have access to the Windows 10 desktop or you're using a device with a legacy BIOS, then y'all can still access the firmware during kick.

To enter the UEFI or legacy BIOS during boot, use these steps:

1. Press the Power push.
2. Encounter the screen splash to identify the key you must press to enter the firmware (if applicable).
3. Press the required fundamental repeatedly until you enter the setup manner. Commonly, you need to press the ESC, Delete, or 1 of the Part keys (F1, F2, F10, etc.).

Afterward you consummate the steps, the device volition admission the BIOS or UEFI firmware, depending on the motherboard back up. If you don't see the data on the screen or the device boots too fast, restart the device again, and every bit before long as the boot starts, press the required key multiple times quickly.

If you can't make the estimator to access the firmware using the keyboard, you may need to check your device manufacturer to find out the primal that you lot need to press during boot.

Here are some reckoner brands and their corresponding keys to access the motherboard firmware:

• Dell: F2 or F12.
• HP: ESC or F10.
• Acer: F2 or Delete.
• ASUS: F2 or Delete.
• Lenovo: F1 or F2.
• MSI: Delete.
• Toshiba: F2.
• Samsung: F2.
• Surface: Press and hold volume up button.

In the instance that your device is using a UEFI firmware, and you tin't seem to admission it during startup, then it's recommended to utilise the Settings choice from inside Windows 10.

Mauro Huculak is technical writer for WindowsCentral.com. His master focus is to write comprehensive how-tos to assist users get the nigh out of Windows 10 and its many related technologies. He has an It groundwork with professional certifications from Microsoft, Cisco, and CompTIA, and he'south a recognized fellow member of the Microsoft MVP community.

Source: https://www.windowscentral.com/how-enter-uefi-bios-windows-10-pcs

Posted by: petersonhorms2000.blogspot.com

Share this post